Nissan Maxima Crankshaft Position Sensor Replacement (Real Job – La Vergne, TN)
- Mobile Mechanic Co
- Aug 6, 2025
- 2 min read
Updated: Apr 24
Date of Service: August 6, 2025
Location: La Vergne, Tennessee
Vehicle: 2006 Nissan Maxima 3.5L SE V6
Service Performed: Crankshaft Position Sensor Replacement
Business: Mobile Mechanic Co. – 615-795-1347
Customer Complaint
I got a call from a customer in La Vergne who said their 2006 Nissan Maxima kept stalling randomly. Sometimes it would crank but not start, and other times it would shut off while driving—definitely not something you want happening on the road.
They also mentioned:
Check Engine Light was on
Hard starting, especially when warm
Occasional loss of power
These are all classic signs I’ve seen many times with this model.
Diagnosis Process
When I arrived, I hooked up my scanner and pulled the codes. The main code that came up was:
P0335 – Crankshaft Position Sensor Circuit Malfunction
On the Nissan Maxima 3.5L V6, this is a very common issue. These sensors tend to fail over time due to heat and age.
Before replacing anything, I always:
Verified the code wasn’t intermittent wiring-related
Checked connector condition
Confirmed live data signal was dropping
Once confirmed, I let the customer know the crankshaft sensor was failing and needed replacement.
The Repair
On this Maxima, the crankshaft position sensor is located near the engine block, and access can be a little tight—especially working mobile without a lift.
Steps I performed:
Safely lifted and secured the vehicle
Located and removed the faulty sensor
Installed a high-quality replacement sensor
Cleared the codes
Tested the vehicle under multiple start cycles
Total repair time was about 1–1.5 hours on-site.
Result
After replacement:
Vehicle started smoothly every time
No more stalling
Check Engine Light stayed off
Engine performance returned to normal
Customer was relieved because they thought it might be something much more expensive like a fuel pump or transmission issue.
Why This Happens on Nissan Maxima
If you own a 2004–2008 Maxima, this is something I see very frequently.
Common causes:
Heat damage over time
Sensor internal failure
Electrical signal loss
It usually starts as intermittent stalling and gets worse if not addressed.
Other Common Nissan Maxima Repairs I See
If you’re searching for Nissan Maxima issues, these are the most common repairs I handle:
1. Camshaft Position Sensor Failure
Often goes hand-in-hand with crankshaft sensor issues. Can cause similar symptoms.
2. Alternator Failure
Battery light, dim lights, or car dying while driving.
3. Bad Ignition Coils / Spark Plugs
Misfires, rough idle, and poor acceleration.
4. CVT Transmission Issues (on newer models)
Jerking, slipping, or delayed acceleration.
5. Brake Pads and Rotors
Very common maintenance—especially for daily drivers.
Why Customers Choose Mobile Mechanic Co.
We come directly to your location
Honest diagnostics—no unnecessary repairs
Real-world experience with Nissan vehicles
Fast turnaround and convenient scheduling
📞 Call or Text: 615-795-1347📱 Facebook: @MobileMechanicCo
Need a Nissan Maxima Repair Near You?
If your Nissan Maxima is stalling, not starting, or showing a Check Engine Light, don’t wait until it leaves you stranded.
We service La Vergne and surrounding areas and can diagnose and fix the issue on-site.
Comments